1. 首頁
  2. 產品中心
  3. 灌注封裝膠 Encapsulants & Potting
  4. SILCOSET 101
BACK

SILCOSET 101灌注封裝膠 Encapsulants & Potting

FEATURE(產品簡介)
  • HIGH TEMPERATURE RESISTANCE
  • ROLLS ROYCE AEROSPACE APPROVED
  • IDEAL FOR LOW MELT METAL ALLOY CASTING
  • GOOD FLOW PROPERTIES
DESCRIPTION(產品簡介)

2 PART CONDENSATION CURE SILICONE ENCAPSULANT HIGH TEMPERATURE

索取樣品
參數表PARAMETERS

  • CODE

    Silcoset 101

  • FEATURE 1

    High temperature resistance

  • FEATURE 2

    Rolls Royce Aerospace approved

  • FEATURE 3

    Ideal for low melt metal alloy casting

  • FEATURE 4

    Good flow properties

  • APPEARANCE

    Viscous liquid

  • TEST CONDITIONS

    After 7 days cure at 23°+/-2°C and 50+/-5% humidity

  • COLOUR

    Red

  • COLOUR A PART

    Red

  • COLOUR b

    Clear

  • SG

    1.5

  • MIN WORKING TEMP - °C

    -60 °C

  • Max WORKING TEMP - °C

    250 °C

  • FDA

    No

  • SHELF LIFE

    7mths

  • MAX STORAGE TEMPERATURE °C

    30 °C

  • PACK TYPE

    2-Part Kit

  • MIX RATIO

    100:1

  • RHEOLOGY

    Viscous  Liquid

  • VISCOSITY A-PART MPAS

    45000Pas

  • VISCOSITY b-PART MPAS

    300 mPas

  • VISCOSITY mixed PART MPAS

    40000mPas

  • NON CORROSIVE

    Yes

  • CURE TYPE

    Condensation

  • RTV OR HEAT CURE

    RTV

  • SELF BONDING

    No

  • DURO SHORE a

    61

  • TENSILE MPA

    4.77MPa

  • UL 94V-0

    No

  • ELONGATION %

    131%

  • TEAR KN/M

    8.1 kN/m

  • MODULUS YOUNGS MPA

    4.18 MPa

  • LINEAR SHRINKAGE %

    0.41 %

  • MAX CURE HRS @ 25 °C

    4HRS

  • CTE VOLUMETRIC PPM/°C

    708 ppm/°C

  • CTE LINEAR PPM/°C

    236 ppm/°C

  • VOLATILE CONTENT PPM

    70 ppm

  • DIELECTRIC STRENGTH KV/MM

    >20 kV/mm

  • POWER FACTOR @1MHZ

    >0.0025

  • PERMITTIVITY

    3

  • THERMAL CONDUCTIVITY W/MK

    0.37 W/mK

  • POT LIFE MINS

    60mins

  • VOLUME RESISTIVITY OHMS CM

    1.51E+14 ohms cm